KenMar Metal Preservative
|
|
|
|
INSTRUCTIONS: Using a clean, soft, dry cloth, apply
preservative on cloth or directly on metal spreading by wiping
lightly (Do NOT rub hard)
Spread on a generous coat to insure thorough coverage.
Allow 15 to 20 minutes to dry. If can’t wait to let dry,
buff lightly with a clean, dry cloth.
For gun use 1 application prior to using gun and 1 prior to
storing gun.
Succeeding applications for all other metals should be made
as often as necessary preferably on a regular basis.
Each new application removes the prior one, leaving the metal
bright and clean with a fresh, protective film that is neither
visible to the eye or is noticeable to the touch.
Note: If streaks or discoloration occur after the first application,
dirt might have dissolved in the preservative. Additional applications
of preservative are needed until all residue has been removed.
CAUTION: Do not ingest. If swallowed, drink 1 to 2 glasses
of water.
DO NOT induce vomiting.
CALL DOCTOR OR POISON CENTER IMMEDIATELY.
Keep out of eyes. In case of eye contact rinse with water for
at least 15 minutes. If skin irritation occurs wash thoroughly
with soap & water.
|
